Newton's Laws on AP Physics 1: Question Guide

Updated: 6 hours ago
Newton's laws on AP Physics 1 are taught in Unit 2, which carries 18–23% of the multiple-choice section, but the same force reasoning returns in energy, momentum, rotation, oscillation and fluids questions, and the 2025 free-response report shows where students lose points: leaving out a force, misjudging a direction and justifying with only one variable. This guide gives a free-body method, worked examples with checked arithmetic, the 2025 errors and a four-week practice plan for the exam on Wednesday 5 May 2027.
It was checked on 21 November 2026 against College Board’s exam, course and description pages, the 2025 Chief Reader Report and the score distributions, all listed in the references. It is a practice guide, not a promise: no study route, including coaching, can make a particular score certain.
Newton's Laws on AP Physics 1 at a Glance (May 2027) Exam: Wednesday 5 May 2027, Session 2, hybrid digital; 42 multiple-choice questions in 85 minutes and 4 free-response questions in 95 minutes, each section 50%. Weight: Unit 2, Force and Translational Dynamics, is 18–23% of multiple choice, tied with Unit 3. 2025 report: Question 4, fluids and Newton's laws, had a mean of 4.64 out of 8; only about a third noted gravity is unchanged when fluid density changes. Method: system, every force, axes, ΣF = ma, symbols first, then numbers and a check. Where coaching helps: feedback on diagrams, algebra and written justifications. |

Serious About Your AP Scores? Let’s Get You There
EduShaale offers subject-specific online 1-on-1 AP coaching, with personalised practice and exam-focused strategy.

Table of Contents
1. Where Newton's Laws on AP Physics 1 Sit on the 2027 Exam
Newton's laws belong to Unit 2, Force and Translational Dynamics, which carries 18–23% of the multiple-choice section, but they appear in almost every other unit as well (AP Physics 1 course page). The exam is on Wednesday 5 May 2027 in Session 2. It is hybrid digital: you answer the multiple-choice questions and view the free-response questions in Bluebook, then handwrite free-response answers in paper booklets (AP Physics 1 exam page).
Section | Questions | Time | Weight |
I: Multiple choice | 42, with discrete questions and sets sharing a stimulus or data | 85 minutes | 50% |
II: Free response | 4, one of each type: mathematical routines, translation between representations, experimental design and analysis, qualitative/quantitative translation | 95 minutes | 50% |
The question count and timing changed for 2027. College Board’s clarifications document shows multiple choice moving from 40 questions to 42, multiple-choice time from 80 minutes to 85, and free-response time from 100 minutes to 95. It lists no change to Unit 2 or Newton’s laws. Calculators are permitted, and reference information is provided in print and in Bluebook; the exam page does not list its contents, so check what you still need to know by heart.
Unit | Multiple-choice weighting |
1. Kinematics | 10–15% |
2. Force and Translational Dynamics | 18–23% |
3. Work, Energy, and Power | 18–23% |
4. Linear Momentum | 10–15% |
5. Torque and Rotational Dynamics | 10–15% |
6. Energy and Momentum of Rotating Systems | 5–8% |
7. Oscillations | 5–8% |
8. Fluids | 10–15% |
Source: College Board course page. Unit 2 ties with Unit 3 as the heaviest unit, and Units 7 and 8 reuse the same force reasoning for springs and buoyancy.
2. What Unit 2 Covers: Nine Topics
The course and exam description lists nine topics in Unit 2 and suggests about 22–27 class periods for them. The table pairs each topic with what you should be able to do.
Topic | What you should be able to do |
2.1 Systems and Center of Mass | Choose a system and treat its parts’ interactions as internal; locate the center of mass on lines of symmetry or for small systems |
2.2 Forces and Free-Body Diagrams | Show every force the environment exerts on an object, drawn from a dot at its center of mass |
2.3 Newton’s Third Law | Identify paired forces: equal in magnitude, opposite in direction, on different objects |
2.4 Newton’s First Law | Recognise that zero net force means constant velocity, and that forces can balance in one direction but not another |
2.5 Newton’s Second Law | Relate the acceleration of the center of mass to the net force, in the same direction |
2.6 Gravitational Force | Use universal gravitation, F = Gm₁m₂/r², as an attractive force along the line between centers |
2.7 Kinetic and Static Friction | Model friction with a coefficient and the normal force |
2.8 Spring Forces | Apply the spring force and relate it to stretch or compression |
2.9 Circular Motion | Treat the net inward force as the cause of centripetal acceleration |
The unit opener highlights the skills of deriving symbolic expressions (2.A), predicting changes from functional dependence (2.D), applying laws to make claims (3.B) and supporting them with evidence (3.C). The last three rows describe standard physics; the description’s own wording for topics 2.7–2.9 was not read in full for this guide, so check it in the document.
3. The Three Laws, Stated the Way the Exam Rewards
Law | What to write | Common slip |
First | If the net force on a system is zero, its velocity is constant (possibly zero). Forces can cancel along one axis and not along another. | Saying a moving object needs a net force to keep moving |
Second | The acceleration of the system’s center of mass is proportional to the net force and in the same direction: ΣF = ma, applied along each axis. | Writing ma as a force on the free-body diagram |
Third | Paired forces are equal in magnitude, opposite in direction and act on different objects, so they never cancel on one object’s diagram. | Treating weight and the normal force as a third-law pair |
The wording follows the essential knowledge in the course and exam description. For a book resting on a table, the weight (Earth pulling the book) and the normal force (table pushing the book) both act on the book and balance only because the acceleration is zero. The third-law partner of the weight is the book’s pull on Earth, and the partner of the normal force is the book’s push on the table.
The third law also matters in system problems. In 2025 Question 1, the Chief Reader Report says stronger responses explained that the block-on-cart and cart-on-block forces are equal and opposite, so the net force on the system is zero; some students wrongly called the friction between block and cart external.
4. A Free-Body Diagram Method That Works Every Time
Use the same sequence on every force problem. The course description says a free-body diagram shows every force the environment exerts on the object, drawn from a dot at its center of mass, and that aligning one axis with the acceleration simplifies the algebra.
Choose the system: one object, or several treated together. Forces between parts of the system are internal and stay off the diagram.
Draw a dot and add every force acting on the system from outside, each labelled by type and by the object exerting it (for example, tension from the string).
Choose axes, with one along the direction of acceleration when you know it. Pick a positive direction and keep it.
Write ΣF = ma along each axis. The net force on an axis with no acceleration is zero.
Substitute force laws: weight mg, spring force kx, kinetic friction μk N, buoyant force ρVg.
Solve symbolically first, then substitute numbers. Check units and limiting cases (what happens if the friction coefficient is zero?).
Check direction and size. If the prompt asks for a justification, state the law, the forces involved and why the result follows.
Diagram checklist Every force has a type, a direction and an exerting object. No ma arrow, no net-force arrow and no forces the system exerts on other objects. The normal force is perpendicular to the surface and is found from the second law, not assumed equal to weight. Third-law partners are on different objects and never on the same diagram. |
The 2025 report’s cross-question themes ask for the same habit: complete diagrams that include every force, such as weight, buoyancy, spring force and friction, with directions (Chief Reader Report).
5. The Forces You Will Meet in Unit 2
Force | Direction and size | Watch for |
Gravitational (weight) | Toward the center of the Earth; near the surface mg. Universal law: F = Gm₁m₂/r² | It does not change when a fluid or surface changes |
Normal | Perpendicular to the surface; value found from the second law (for example mg cosθ on an incline with no other perpendicular force) | Not always equal to mg |
Tension | Along the string, away from the object | Equal on both sides of an ideal string over an ideal pulley, but not equal to either weight when the system accelerates |
Kinetic friction | Opposes sliding; magnitude μk N | Uses N, not mg, in general |
Static friction | Opposes the tendency to slide; up to a maximum of μs N | Often smaller than the maximum |
Spring | Toward the equilibrium position; magnitude kx | Spring contact does not by itself mean slowing down |
Buoyant | Upward on a submerged object; magnitude ρf V g | Weight must still be included |
Centripetal | Not a separate force: the net inward force causing v²/r | Do not add it to a diagram as an extra arrow |
Buoyancy belongs to Unit 8, Fluids, but a Newton’s-second-law derivation is the same kind of argument. EduShaale’s AP Physics 2 changes guide explains how fluids moved into this course.
6. Worked Examples: Atwood Machine and Kinetic Friction
Atwood machine
Masses of 3 kg and 2 kg hang over a light pulley on a light string. Find the acceleration and the tension. Take g = 9.8 m/s² and neglect friction in the pulley.
Step | Working |
System | Treat both masses together; the string tension is internal. Positive direction: the heavier mass moving down |
Second law | ΣF = (3 − 2)g = (3 + 2)a, so a = g/5 = 1.96 m/s² |
Tension (2 kg) | T − 2g = 2a, so T = 2(9.8 + 1.96) = 23.5 N |
Check (3 kg) | 3g − T = 3a, so T = 3(9.8 − 1.96) = 23.5 N |
The tension is between the two weights (19.6 N and 29.4 N), as it must be when one mass accelerates up and the other down.
Kinetic friction on a horizontal surface
A 4 kg block is pulled across a horizontal surface by a 20 N horizontal force. The coefficient of kinetic friction is 0.25. Find the acceleration.
Step | Working |
Vertical | No vertical acceleration, so N = mg = 4 × 9.8 = 39.2 N |
Friction | fk = μk N = 0.25 × 39.2 = 9.8 N, opposing the motion |
Horizontal | ΣF = 20 − 9.8 = 4a, so a = 2.55 m/s² |
7. Worked Examples: Incline, Spring and Circular Motion
Block sliding down a rough incline
A 5.0 kg block slides down a 30° incline with μk = 0.20. Find its acceleration.
Step | Working |
Axes | One axis along the incline, one perpendicular to it |
Perpendicular | No acceleration, so N = mg cosθ = 5.0 × 9.8 × cos 30° = 42.4 N |
Along the incline | ΣF = mg sinθ − μk N = 24.5 − 8.49 = 5.0a |
Result | a = g(sinθ − μk cosθ) = 3.20 m/s² down the incline |
The symbolic form shows the mass cancels. Compare it with 2026 Question 3, which asked students to find a coefficient of kinetic friction from the slope of a graph for a block on a 30° rough ramp (2026 free-response questions).
Mass hanging from a spring
A 2.0 kg mass hangs from a spring with k = 200 N/m. It is released from rest with the spring unstretched. What is its acceleration when the spring is stretched 0.050 m?
Step | Working |
Forces | Weight mg = 19.6 N down; spring force kx = 200 × 0.050 = 10.0 N up |
Second law | Net force = 19.6 − 10.0 = 9.6 N down, so a = 4.8 m/s² down |
Interpretation | The mass is still speeding up. The spring only balances the weight at x = mg/k = 0.098 m |
This is the idea behind the 2025 Question 2 misconception: many students believed a moving object always slows on contact with a spring (Chief Reader Report). Whether it speeds up or slows depends on the net force.
Circular motion on a table
A 0.50 kg ball moves at 4.0 m/s in a horizontal circle of radius 0.80 m on a frictionless table, held by a string. The only horizontal force is tension, so T = mv²/r = 0.50 × 4.0² ÷ 0.80 = 10.0 N, giving a centripetal acceleration of 20.0 m/s² toward the center.
8. Worked Example: Buoyancy and Newton's Second Law
A fully submerged block of density ρo and volume V in a fluid of density ρf has an upward buoyant force ρf V g and a downward weight ρo V g. Newton’s second law gives a = (ρf/ρo − 1)g, upward if the fluid is denser. Ignore drag and take V = 1.0 × 10⁻³ m³ and ρo = 600 kg/m³, so m = 0.60 kg.
Fluid | Buoyant force | Weight | Net force up | Acceleration |
Water, 1000 kg/m³ | 9.80 N | 5.88 N | 3.92 N | 6.53 m/s² |
Denser fluid, 1200 kg/m³ | 11.76 N | 5.88 N | 5.88 N | 9.80 m/s² |
The weight is the same in both fluids, and the denser fluid raises the buoyant force, so the upward acceleration is larger. This is the structure of 2025 Question 4, a fluids and Newton’s-laws question with a mean of 4.64 out of 8. The report says only about a third of students noted that the gravitational force is unchanged when the fluid density changes (Chief Reader Report).
9. What the 2025 Chief Reader Report Flagged
2025 question | Task and mean | Force-reasoning error reported |
Q1: Conservation of momentum | Mathematical routines; 4.74 of 10 (47%) | Calling the block-cart friction external to the system; stating momentum is constant without tying it to the scenario |
Q2: Conservation of energy | Translating between representations; 6.09 of 12 (51%) | Believing a moving object always slows on contact with a spring; justifying with only one kind of potential energy |
Q3: Torque and rotational dynamics | Experimental design and analysis; 4.93 of 10 (49%) | Assuming the spring scale reads the block’s weight wherever it hangs, rather than balancing torque |
Q4: Fluids and Newton’s laws | Qualitative/quantitative translation; 4.64 of 8 (58%) | Leaving out weight; thinking a denser fluid only resists motion; mixing up the directions of buoyancy and gravity; starting with Bernoulli’s equation when told to use the second law |
Source: 2025 Chief Reader Report. The percentages are the means divided by the maximum points, computed for this guide. Two further notes from the report: students confused the density symbol with the letter p, calling it pressure or momentum, and some wrote justifications that contradicted their own inequality.
Draw every force and give its direction before writing any equation.
Follow the starting principle the prompt names, and use the reference equations.
Make a justification address all relevant forces and variables, not just one.
10. How Free-Response Questions Test Forces
The exam has one free-response question of each type, so force reasoning can show up in any of them. College Board lists the type but not the point values on the exam page.
Question type | How Newton’s laws can appear | What earns credit |
Mathematical routines | Derive an acceleration or force symbolically, then calculate it | A correct starting law, algebra shown, units |
Translation between representations | Sketch a free-body diagram, a force or acceleration graph, or a motion description | Complete forces, correct directions, consistent graphs |
Experimental design and analysis | Plan a measurement of a coefficient of friction or spring constant from a linear graph | Measurable quantities, a linear graph, slope meaning |
Qualitative/quantitative translation | Predict and justify what changes when a force or mass changes | A claim backed by the second law and all forces |
The skill weights on the course page show how much argument matters: free-response weighting is 20–35% for creating representations, 30–40% for mathematical routines and 35–45% for scientific questioning and argumentation. See EduShaale’s AP Physics 1 FRQ strategy guide for a method, and AP Physics 1 labs for the experimental-design side.
11. Linking Newton's Laws to Other Units
Unit | How it connects to Newton’s laws |
1. Kinematics | The second law gives the acceleration; kinematics then gives velocity and position. See EduShaale’s kinematics guide |
3. Work, Energy, and Power | The net force times displacement along it is the work done; energy methods are an alternative to force methods when forces vary with position |
4. Linear Momentum | The third law is why internal forces cancel in a system, so momentum is conserved when the external net force is zero |
5. Torque and Rotational Dynamics | Zero net force does not mean zero net torque; the rotational version of the second law relates torque to angular acceleration |
7. Oscillations | A spring-mass system is the second law with a restoring force |
8. Fluids | Buoyancy is one more force on the diagram |
Choose force methods when the prompt gives forces or asks for acceleration, and energy or momentum methods when it gives speeds before and after. Practise switching between them on the same scenario. EduShaale’s kinematics guide covers the motion side.
12. Past Papers and Score Data: What They Tell You
College Board lists free-response questions and scoring guidelines for 2023–2026, with chief reader reports, statistics and sample responses for 2023–2025 (2026 has questions and scoring guidelines only). The page notes that these materials do not completely align with the current exam because of the 2024–25 course and exam revisions (past exam questions). Use them for rubric practice and check coverage against the current course description.
Year | 5 | 4 | 3 | 2 | 1 | 3 or higher |
2026 (rounded) | 19% | 24% | 25% | 15% | 17% | 68% |
2025 | 19.8% | 24.7% | 22.9% | 13.4% | 19.2% | 67.3% |
2024 | 10.2% | 17.9% | 19.2% | 26.1% | 26.6% | 47.3% |
Source: College Board’s AP Physics 1 score distributions. The 2026 row is rounded and its test-taker count and mean were blank when checked, so treat it as provisional. The page does not explain why the share of 5s rose from 10.2% in 2024 to 19.8% in 2025, and the figures do not show how well students did on Unit 2. For a scoring plan, read how to score a 5 on AP Physics 1.
13. A Four-Week Practice Plan, and Where 1-on-1 Coaching Fits
The plan assumes you have met the Unit 2 content once. There are 165 days, about 23 weeks, between this guide’s check date (21 November 2026) and the exam on 5 May 2027, so you can repeat the four weeks as needed.
Week | Practise | Where feedback helps |
1 | Free-body diagrams and Newton’s three laws (topics 2.1–2.5) on 10 mixed scenarios | Check that every force and direction is on the diagram |
2 | Gravity, friction and springs (2.6–2.8): incline, pulley and spring problems, solved symbolically first | Review algebra and the use of the normal force |
3 | Circular motion (2.9) and buoyancy: one Atwood, one circular and one fluids problem, with a written justification each | Compare your justifications with the scoring guidelines |
4 | Two timed handwritten free-response sets, marked against released scoring guidelines, then an error log | Timing, justification gaps and a revised plan |
Why students choose EduShaale for AP Physics 1: lessons are live, online and 1-on-1, and each session starts from the student’s own free-body diagrams and written justifications instead of a fixed class outline. A plan is built around the student’s current level and the free-response question types, with practice marked against the official scoring guidelines and feedback between lessons. Confirm the available tutor, schedule, fees and feedback arrangements when you get in touch, and use the first sessions to check the fit. Explore EduShaale’s online AP coaching; a target score is a goal, not a promised result.
Frequently Asked Questions
Q: How much of the AP Physics 1 exam is Newton's laws?
A: Unit 2, Force and Translational Dynamics, is 18–23% of the multiple-choice section, tied with Unit 3 as the heaviest unit. Newton's laws also appear in momentum, rotation, oscillation and fluids questions.
Q: What is the 2027 AP Physics 1 exam format?
A: It is on Wednesday 5 May 2027 in Session 2 and is hybrid digital. Section I has 42 multiple-choice questions in 85 minutes and Section II has 4 free-response questions in 95 minutes, each worth 50%. Free-response answers are handwritten in paper booklets. Calculators are permitted.
Q: Do I need a free-body diagram for every force problem?
A: Not every question asks for one, but the 2025 Chief Reader Report asks students to draw complete diagrams with every force and its direction. A diagram is the most reliable first step for any force problem.
Q: Does the normal force always equal weight?
A: No. The normal force is found from Newton's second law along the perpendicular axis. On a level surface with no other vertical forces it equals mg, but on a 30° incline with no other perpendicular force it is mg cos 30°.
Q: Are weight and the normal force a third-law pair?
A: No. Both act on the same object, and the third law pairs forces on different objects. The partner of the weight is the object's pull on the Earth, and the partner of the normal force is the object's push on the surface.
Q: What did the 2025 report say about Newton's laws?
A: Question 4, on fluids and Newton's laws, had a mean of 4.64 out of 8. Many students left out weight, and only about a third noted that gravity is unchanged when fluid density changes. Others began with Bernoulli's equation when told to use the second law.
Q: How can EduShaale help with Newton's laws on AP Physics 1?
A: EduShaale offers live online 1-on-1 AP coaching with study plans and feedback on your own diagrams and written justifications. Confirm tutor availability, schedule and fees when you get in touch.
References
College Board, course and exam: AP Physics 1 exam, course page, course and exam description, clarifications, AP Physics 1 student page
College Board, released materials: past exam questions, 2025 Chief Reader Report, 2026 free-response questions
College Board, scores: AP Physics 1 score distributions
EduShaale: online AP coaching, AP Physics 1 FRQ strategy, AP Physics kinematics, how to score a 5 on AP Physics 1, AP Physics 1 labs, AP Physics 1 2027 guide, AP Physics 2 changes
Ready to Start Your AP Journey?
EduShaale offers subject-specific online 1-on-1 AP coaching for students aiming for 4s and 5s, with personalised practice and exam-focused strategy.
Subjects include AP Physics, AP Calculus, AP Chemistry and more.
Online, one-to-one, scheduled around your timetable.
📞 Call or WhatsApp: +91 90195 25923
🌐 www.edushaale.com/advanced-placement
Mock tests: testprep.edushaale.com (sign-in required)
© 2026 EduShaale | www.edushaale.com | info@edushaale.com | +91 9019525923. Written by Aishwarya, EduShaale. Last reviewed 21 November 2026.
AP, Advanced Placement, AP Central, and College Board are registered trademarks of the College Board. Exam details and score data come from the College Board pages linked above and are current as of 21 November 2026 for the May 2027 exam; verify at apcentral.collegeboard.org. This guide is for educational purposes only and is not endorsed by the College Board.



Comments